LED REFERENCE
HD 4.0 - Trim Plus - Trim II | ||
| LED COLOR | DESCRIPTION | STATUS MEANING |
| RED / BLUE [alternating] | Device Powering Up | SkyBell is charging a small battery used for voltage regulation. |
| YELLOW [solid] | Device Boot-up | The SkyBell is starting up. |
| RED / GREEN [alternating] | Sync - Mode | SkyBell is ready to Sync with the SkyBell App. |
| ORANGE [flashing] | Connecting to Wi-Fi | SkyBell is trying to connect to your Wi-Fi network. |
| BLUE / GREEN [alternating] | Connecting to Servers | SkyBell is connecting to the SkyBell Managed Servers. |
| GREEN [solid] | Ready Mode | SkyBell is online and operational. |
| WHITE [solid] | In-Call Mode | SkyBell has been triggered, and the camera is active. |
| LIGHT BLUE [solid] | Vacancy Mode | SkyBell services are removed, but the SkyBell will ring a mechanical chime. |
| BLUE / YELLOW [alternating] | Firmware Update | SkyBell is recieving and applying an update to the firmware. |
Slimline - Slimline II | ||
| LED COLOR | DESCRIPTION | STATUS MEANING |
| RED / BLUE [alternating] | Device Powering Up | SkyBell is charging a small battery used for voltage regulation. |
| BLUE [solid] | Device Boot-up | The SkyBell is starting up. |
| RED / GREEN [alternating] | Sync - Mode | SkyBell is ready to Sync with the SkyBell App. |
| ORANGE [flashing] | Connecting to Wi-Fi | SkyBell is trying to connect to your Wi-Fi network. |
| BLUE / GREEN [alternating] | Connecting to Servers | SkyBell is connecting to the SkyBell Managed Servers. |
| GREEN [solid] | Ready Mode | SkyBell is online and operational. |
| WHITE [solid] | In-Call Mode | SkyBell has been triggered, and the camera is active. |
| LIGHT BLUE [solid] | Vacancy Mode | SkyBell services are removed, but the SkyBell will ring a mechanical chime. |
| BLUE / YELLOW [alternating] | Firmware Update | SkyBell is recieving and applying an update to the firmware. |
LED SEQUENCES
Note: On some devices you may also recieve an audio prompt that conisides with the change in LED color if initiated by long button press.
| First Time Power On | (CONNECTED TO POWER) Flashing Blue/Red >> Solid Yellow >> Flashing Red/Green |
| Power Cycle(E.X. Loss of Power) | (START-UP) Solid Yellow >> Flashing Orange >> Blue/Green >> Solid Green |
| Soft Reboot | (HOLD BUTTON) Flashing Green >> Flashing Dark Blue (LET GO) --> Solid Yellow >> Flashing Orange >> Blue/Green >> Solid Green |
| Factory Reset | (HOLD BUTTON) Flashing Green >> Flashing Dark Blue >> Flashing Yellow (LET GO) >> Solid Yellow |
| Sync Mode | (HOLD BUTTON) Flashing Green >> (LET GO) >> Red/Green |
| Firmware Update | (INITATED BY SKYBELL SUPPORT DIRECTLY) Alternating Yellow /Blue >>Solid Yellow >> Flashing Orange >> Blue/Green >> Solid Green |