SkyBell is designed to replace your current doorbell. SkyBell needs four things to be able to work for your door:
- Direct power from low voltage transformer. SkyBell is only designed to work with your current doorbell’s low voltage transformer. The primary power standard to the transformer can be 120/130 VAC or 220/230/240 VAC. The secondary power from the transformer to SkyBell must be 10-36 VAC 10 VA. SkyBell can work with a 12 VDC power supply but you MUST use a 10ohm/10watt resistor on one connection between SkyBell and your power supply. Failure to do so will damage your SkyBell and automatically void your warranty. Do not connect both wires of SkyBell to a transformer or power supply without either a wired doorbell chime in series or a resistor. If you DO NOT use a doorbell chime, a 10 ohm / 10 watt resistor MUST BE USED between one connection of SkyBell and the power source.
- 2.4 Ghz WiFi Connection with full time internet. SkyBell requires a 2.4 Ghz wireless router connection with its own SSID. SkyBell will not work on a 5 Ghz wireless standard at this time. If you have a dual-band router, be sure to segregate your wireless channels and connect SkyBell to the 2.4ghz channel. SkyBell also requires that N-only routers be set to b/g or b/g/n settings and not “N-Only”. SkyBell works best on the 20 MHz bandwidth and with WPA security settings.
- 1.5 mbps Wi-Fi Upload Speed. For SkyBell to work at its best, we recommend that the SkyBell be placed in an area that receives a good Wi-Fi signal that allows for at least 1.5 mbps upload speeds and 1mbps download speeds. If you do not have enough Wi-Fi signal strength, you can move your router closer to your door or purchase a Wi-Fi range extender. Click the link to see the range extender we recommend. To check your network’s upload speed, please follow the instructions on this page: Speed Test.
- Wired Doorbell Chime SkyBell works with mechanical and digital doorbell chimes. A mechanical doorbell chime does not require any additional effort. A digital doorbell chime requires the SkyBell Digital Doorbell Adapter, which may be sold separately. The only way to know for sure if you have a mechanical door chime is through visual inspection. A mechanical doorbell chime looks like the picture below. At this time, SkyBell is not compatible with wireless doorbell chimes or intercom systems. Click the link to see a list of door chimes we recommend to use with SkyBell.