** Please note ** All hardware sizes listed are the expected default. However, hardware sizing is subject to variances due to supply limitations or changes during/between production cycles.
| SkyBell Set Screw (HD, 3.1, 4.0, Trim Plus, and Trim II Pro) |
Phillips Pan Head 3mm, msp 3x6 |
| Wiring Terminal Screw (HD, 3.1, 4.0, Trim Plus, and Trim II Pro) |
Zinc Plated Steel, Phillips Head #2, Pan Head Machine Screw, M3-05 Thread - 5 mm |
| SkyBell Drill Bit Recommended Size | 6mm or 15/64" |
|
SkyBell Allen Wrench Size |
0.98 mm / 0.03858268 Inches |